CLIA Kit for Serpin B3 (SERPINB3)

SCCA1; T4-A; Serpin Peptidase Inhibitor,Clade B(ovalbumin),Member 3; Serpin B3

Specificity

This assay has high sensitivity and excellent specificity for detection of Serpin B3 (SERPINB3).
No significant cross-reactivity or interference between Serpin B3 (SERPINB3) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Serpin B3 (SERPINB3) and the recovery rates were calculated by comparing the measured value to the expected amount of Serpin B3 (SERPINB3) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 93-105 101
EDTA plasma(n=5) 85-92 89
heparin plasma(n=5) 88-97 92

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Serpin B3 (SERPINB3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Serpin B3 (SERPINB3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Serpin B3 (SERPINB3) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 87-95% 94-103% 93-105% 98-105%
EDTA plasma(n=5) 80-94% 93-102% 86-104% 93-104%
heparin plasma(n=5) 88-101% 78-101% 78-89% 82-99%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
PLOS ONE Susceptibility to COPD: Differential Proteomic Profiling after Acute Smoking Pubmed:25036363
Annals of Clinical Biochemistry Diagnostic specificity and sensitivity of PIVKAII, GP3, CSTB, SCCA1 and HGF for the diagnosis of hepatocellular carcinoma in patients with alcoholic liver cirrhosis. pubmed:28766361
Head & neck Combination of serum squamous cell carcinoma antigens 1 and 2 as potential diagnostic marker for sinonasal squamous cell carcinoma and inverted papilloma Pubmed: 30376194
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB372Hu02 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB372Hu01 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
EPB372Hu61 Eukaryotic Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB372Hu03 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
PAB372Hu03 Polyclonal Antibody to Serpin B3 (SERPINB3) WB; IHC; ICC; IP.
PAB372Hu01 Polyclonal Antibody to Serpin B3 (SERPINB3) WB; ICC; IHC-P; IHC-F; ELISA.
PAB372Hu02 Polyclonal Antibody to Serpin B3 (SERPINB3) WB; IHC; ICC; IP.
MAB372Hu24 Monoclonal Antibody to Serpin B3 (SERPINB3) WB; IHC.
MAB372Hu22 Monoclonal Antibody to Serpin B3 (SERPINB3) WB; IHC; ICC; IP.
MAB372Hu21 Monoclonal Antibody to Serpin B3 (SERPINB3) WB; IHC; ICC; IP.
MAB372Hu23 Monoclonal Antibody to Serpin B3 (SERPINB3) WB.
FAB372Hu06 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody Flow cytometry.
FAB372Hu02 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody Flow cytometry.
FAB372Hu04 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody Flow cytometry.
SEB372Hu ELISA Kit for Serpin B3 (SERPINB3) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB372Hu CLIA Kit for Serpin B3 (SERPINB3) Chemiluminescent immunoassay for Antigen Detection.
LMB372Hu Multiplex Assay Kit for Serpin B3 (SERPINB3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.