Multiplex Assay Kit for Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array)

SCCA1; T4-A; Serpin Peptidase Inhibitor,Clade B(ovalbumin),Member 3; Serpin B3

Specificity

This assay has high sensitivity and excellent specificity for detection of Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 89-96 93
EDTA plasma(n=5) 95-102 98
heparin plasma(n=5) 88-95 92

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 82-93% 78-104% 84-101% 97-105%
EDTA plasma(n=5) 81-93% 89-97% 90-104% 82-91%
heparin plasma(n=5) 79-91% 80-95% 81-98% 96-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
PLOS ONE Susceptibility to COPD: Differential Proteomic Profiling after Acute Smoking Pubmed:25036363
Annals of Clinical Biochemistry Diagnostic specificity and sensitivity of PIVKAII, GP3, CSTB, SCCA1 and HGF for the diagnosis of hepatocellular carcinoma in patients with alcoholic liver cirrhosis. pubmed:28766361
Head & neck Combination of serum squamous cell carcinoma antigens 1 and 2 as potential diagnostic marker for sinonasal squamous cell carcinoma and inverted papilloma Pubmed: 30376194
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB372Hu02 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB372Hu01 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
EPB372Hu61 Eukaryotic Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB372Hu03 Recombinant Serpin B3 (SERPINB3) Positive Control; Immunogen; SDS-PAGE; WB.
PAB372Hu03 Polyclonal Antibody to Serpin B3 (SERPINB3) WB; IHC; ICC; IP.
PAB372Hu01 Polyclonal Antibody to Serpin B3 (SERPINB3) WB; IHC
PAB372Hu02 Polyclonal Antibody to Serpin B3 (SERPINB3) IHC
MAB372Hu24 Monoclonal Antibody to Serpin B3 (SERPINB3) WB; IHC
MAB372Hu22 Monoclonal Antibody to Serpin B3 (SERPINB3) WB
MAB372Hu25 Monoclonal Antibody to Serpin B3 (SERPINB3) ICC/IF
MAB372Hu21 Monoclonal Antibody to Serpin B3 (SERPINB3) WB
MAB372Hu23 Monoclonal Antibody to Serpin B3 (SERPINB3) WB
FAB372Hu06 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody FCM
FAB372Hu02 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody FCM
FAB372Hu04 Anti-Serpin B3 (SERPINB3) Monoclonal Antibody FCM
SEB372Hu ELISA Kit for Serpin B3 (SERPINB3) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB372Hu CLIA Kit for Serpin B3 (SERPINB3) Chemiluminescent immunoassay for Antigen Detection.
CMB372Hu Multiplex Assay Kit for Serpin B3 (SERPINB3) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
LMB372Hu Multiplex Assay Kit for Serpin B3 (SERPINB3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.