Wide-range ELISA Kit for Complement Factor I (CFI)

CF-I; C3b-INA; FI; IF; KAF; Factor I; Konglutinogen-Activating Factor; C3b-Inactivator; C3B/C4B inactivator

Specificity

This assay has high sensitivity and excellent specificity for detection of Wide-range Complement Factor I (CFI).
No significant cross-reactivity or interference between Wide-range Complement Factor I (CFI) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Wide-range Complement Factor I (CFI) and the recovery rates were calculated by comparing the measured value to the expected amount of Wide-range Complement Factor I (CFI) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-102 81
EDTA plasma(n=5) 98-105 102
heparin plasma(n=5) 96-105 101

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Wide-range Complement Factor I (CFI) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Wide-range Complement Factor I (CFI) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Wide-range Complement Factor I (CFI) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 86-102% 95-104% 94-101% 86-101%
EDTA plasma(n=5) 91-101% 96-104% 78-91% 80-97%
heparin plasma(n=5) 91-99% 95-104% 80-92% 84-98%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
J Thromb Haemost A case report of thrombotic microangiopathy without renal involvement carrying two novel mutations in complement-regulator genes PubMed: 26613809
Pediatr Int Atypical hemolytic uremic syndrome: Korean pediatric series PubMed: 25443527
United States Patent Application  NOVEL ASSAY y2016:139118
Researchgate Compliment factor i bioassay US20170285024
PLoS One A monoclonal antibody targeting amyloid β (Aβ) restores complement factor I bioactivity: Potential implications in age-related macular degeneration and … Pubmed:29782502
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE The importance of sialic acid, pH and ion concentration on the interaction of uromodulin and complement factor H 33788378
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB978Hu02 Recombinant Complement Factor I (CFI) Positive Control; Immunogen; SDS-PAGE; WB.
RPB978Hu01 Recombinant Complement Factor I (CFI) Positive Control; Immunogen; SDS-PAGE; WB.
PAB978Hu01 Polyclonal Antibody to Complement Factor I (CFI) WB; IHC; ICC; IP.
PAB978Hu02 Polyclonal Antibody to Complement Factor I (CFI) WB; IHC; ICC; IP.
MAB978Hu22 Monoclonal Antibody to Complement Factor I (CFI) WB; IHC; ICC; IP.
WEB978Hu Wide-range ELISA Kit for Complement Factor I (CFI) Enzyme-linked immunosorbent assay for Antigen Detection.
SEB978Hu ELISA Kit for Complement Factor I (CFI) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB978Hu Multiplex Assay Kit for Complement Factor I (CFI) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.