CLIA Kit for Toll Like Receptor 3 (TLR3)

CD283

Specificity

This assay has high sensitivity and excellent specificity for detection of Toll Like Receptor 3 (TLR3).
No significant cross-reactivity or interference between Toll Like Receptor 3 (TLR3) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Toll Like Receptor 3 (TLR3) and the recovery rates were calculated by comparing the measured value to the expected amount of Toll Like Receptor 3 (TLR3) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-102 82
EDTA plasma(n=5) 90-101 97
heparin plasma(n=5) 89-96 92

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Toll Like Receptor 3 (TLR3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Toll Like Receptor 3 (TLR3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Toll Like Receptor 3 (TLR3) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-91% 97-105% 94-105% 86-93%
EDTA plasma(n=5) 88-96% 78-104% 86-104% 97-104%
heparin plasma(n=5) 83-101% 83-97% 95-104% 87-96%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Chinese Medical Journal Expression of soluble Toll-like receptors in pleural effusions CMJ: 2010823483999506297
Heliyon Daily oscillations in expression and responsiveness of Toll-like receptors in splenic immune cells Pubmed:29862343
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB989Mu01 Recombinant Toll Like Receptor 3 (TLR3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB989Mu02 Recombinant Toll Like Receptor 3 (TLR3) Positive Control; Immunogen; SDS-PAGE; WB.
RPB989Mu03 Recombinant Toll Like Receptor 3 (TLR3) Positive Control; Immunogen; SDS-PAGE; WB.
PAB989Mu01 Polyclonal Antibody to Toll Like Receptor 3 (TLR3) WB; IHC; ICC; IP.
PAB989Mu02 Polyclonal Antibody to Toll Like Receptor 3 (TLR3) WB; IHC; ICC; IP.
PAB989Mu03 Polyclonal Antibody to Toll Like Receptor 3 (TLR3) WB; IHC; ICC; IP.
LAB989Mu71 Biotin-Linked Polyclonal Antibody to Toll Like Receptor 3 (TLR3) WB; IHC; ICC.
SEB989Mu ELISA Kit for Toll Like Receptor 3 (TLR3) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB989Mu CLIA Kit for Toll Like Receptor 3 (TLR3) Chemiluminescent immunoassay for Antigen Detection.
LMB989Mu Multiplex Assay Kit for Toll Like Receptor 3 (TLR3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB989Mu01 ELISA Kit DIY Materials for Toll Like Receptor 3 (TLR3) Main materials for "Do It (ELISA Kit) Yourself".