CLIA Kit for Calreticulin (CALR)

CRT; RO; SSA; CC1qR; ERp60; HACBP; grp60; CRTC; CRP55; Calregulin; Sicca Syndrome Antigen A; Autoantigen Ro; Endoplasmic reticulum resident protein 60

Specificity

This assay has high sensitivity and excellent specificity for detection of Calreticulin (CALR).
No significant cross-reactivity or interference between Calreticulin (CALR) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Calreticulin (CALR) and the recovery rates were calculated by comparing the measured value to the expected amount of Calreticulin (CALR) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 90-99 95
EDTA plasma(n=5) 97-105 101
heparin plasma(n=5) 78-98 83

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Calreticulin (CALR) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Calreticulin (CALR) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Calreticulin (CALR) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 80-101% 97-105% 88-95% 84-98%
EDTA plasma(n=5) 95-103% 82-96% 79-94% 97-105%
heparin plasma(n=5) 92-99% 85-93% 97-105% 84-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Journal of Investigative Dermatology Oxidative Stress-Induced Calreticulin Expression and Translocation: New Insights into the Destruction of Melanocytes Pubmed: 23771121
International Journal of Molecular Sciences The Anticoagulant Effect of PGI2S and tPA in Transgenic Umbilical Vein Endothelial Cells Is Linked to Up-Regulation of PKA and PKC Mdpi: Source
The Journal of Maternal-Fetal & Neonatal Medicine Amniotic fluid calreticulin in pregnancies complicated by the preterm prelabor rupture of membranes Pubmed:26953684
journal of maternal-fetal & neonatal medicine Cervical fluid calreticulin and cathepsin-G in pregnancies complicated by preterm prelabor rupture of membranes. pubmed:28152632
Talanta Investigation of the interaction between calreticulin and immunoglobulin G by capillary electrophoresis and computer modeling Doi: 10.1016/j.talanta.2018.11.098
Sci Adv Thermostable ionizable lipid-like nanoparticle (iLAND) for RNAi treatment of hyperlipidemia Pubmed:35171673
Catalog No. Related products for research use of Rattus norvegicus (Rat) Organism species Applications (RESEARCH USE ONLY!)
RPB486Ra01 Recombinant Calreticulin (CALR) Positive Control; Immunogen; SDS-PAGE; WB.
PAB486Ra01 Polyclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra22 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra29 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra24 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra25 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra27 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra23 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra21 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
MAB486Ra28 Monoclonal Antibody to Calreticulin (CALR) WB; IHC; ICC; IP.
SEB486Ra ELISA Kit for Calreticulin (CALR) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB486Ra CLIA Kit for Calreticulin (CALR) Chemiluminescent immunoassay for Antigen Detection.
LMB486Ra Multiplex Assay Kit for Calreticulin (CALR) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB486Ra01 ELISA Kit DIY Materials for Calreticulin (CALR) Main materials for "Do It (ELISA Kit) Yourself".