CLIA Kit for Apoptotic Peptidase Activating Factor 1 (APAF1)

CED4; Apoptotic Protease Activating Factor

Specificity

This assay has high sensitivity and excellent specificity for detection of Apoptotic Peptidase Activating Factor 1 (APAF1).
No significant cross-reactivity or interference between Apoptotic Peptidase Activating Factor 1 (APAF1) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Apoptotic Peptidase Activating Factor 1 (APAF1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Apoptotic Peptidase Activating Factor 1 (APAF1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Iranian Journal of phamaceutical research Potential anti-tumor activity of kefir-induced juglone and resveratrol fractions against Ehrlich ascites carcinoma-bearing BALB/c mice
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB054Hu01 Recombinant Apoptotic Peptidase Activating Factor 1 (APAF1) Positive Control; Immunogen; SDS-PAGE; WB.
PAB054Hu01 Polyclonal Antibody to Apoptotic Peptidase Activating Factor 1 (APAF1) WB; IHC; ICC; IP.
MAB054Hu22 Monoclonal Antibody to Apoptotic Peptidase Activating Factor 1 (APAF1) WB; IHC; ICC; IP.
SEB054Hu ELISA Kit for Apoptotic Peptidase Activating Factor 1 (APAF1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB054Hu CLIA Kit for Apoptotic Peptidase Activating Factor 1 (APAF1) Chemiluminescent immunoassay for Antigen Detection.
LMB054Hu Multiplex Assay Kit for Apoptotic Peptidase Activating Factor 1 (APAF1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.