Packages (Simulation)
Reagent Preparation
Image (I)
Image (II)
Certificate
Multiplex Assay Kit for Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay)
BPTI; Trasylol; Pancreatic Trypsin Inhibitor; Basic protease inhibitor
(Note: Up to 8-plex in one testing reaction)
- Product No.LMA968Po
- Organism SpeciesSus scrofa; Porcine (Pig) Same name, Different species.
- Sample Typeserum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Test MethodCompetitive Inhibition
- Assay Length1.5h
- Detection Range0.1-100ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.033 ng/mL.
- DownloadInstruction Manual
- UOM 8Plex 7Plex 6Plex 5Plex 4Plex 3Plex 2Plex1Plex
- FOB
US$ 472
US$ 490
US$ 517
US$ 553
US$ 590
US$ 644
US$ 726
Result
For more details, please contact local distributors! US$ 907 Add to Price Calculator
Specificity
This assay has high sensitivity and excellent specificity for detection of Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay).
No significant cross-reactivity or interference between Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) and analogues was observed.
Recovery
Matrices listed below were spiked with certain level of recombinant Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) and the recovery rates were calculated by comparing the measured value to the expected amount of Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) in samples.
Matrix | Recovery range (%) | Average(%) |
serum(n=5) | 83-90 | 87 |
EDTA plasma(n=5) | 89-105 | 93 |
heparin plasma(n=5) | 86-104 | 93 |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample | 1:2 | 1:4 | 1:8 | 1:16 |
serum(n=5) | 97-105% | 79-92% | 83-92% | 81-93% |
EDTA plasma(n=5) | 95-105% | 94-102% | 78-99% | 80-88% |
heparin plasma(n=5) | 78-95% | 90-97% | 99-105% | 78-89% |
Stability
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Reagents and materials provided
Reagents | Quantity | Reagents | Quantity |
96-well plate | 1 | Plate sealer for 96 wells | 4 |
Pre-Mixed Standard | 2 | Standard Diluent | 1×20mL |
Pre-Mixed Magnetic beads (22#:AP) | 1 | Analysis buffer | 1×20mL |
Pre-Mixed Detection Reagent A | 1×120μL | Assay Diluent A | 1×12mL |
Detection Reagent B (PE-SA) | 1×120μL | Assay Diluent B | 1×12mL |
Sheath Fluid | 1×10mL | Wash Buffer (30 × concentrate) | 1×20mL |
Instruction manual | 1 |
Assay procedure summary
1. Preparation of standards, reagents and samples before the experiment;
2. Add 50μL standard or sample to each well,
add 10μL magnetic beads,and 50μL Detection Reagent A,incubate 60min at 37°C on shaker;
3. Wash plate on magnetic frame for three times;
4. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
5. Wash plate on magnetic frame for three times;
6. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.
GIVEAWAYS
INCREMENT SERVICES
Magazine | Citations |
24 | Aprotinin prevents proteolytic epithelial sodium channel (ENaC) activation and volume retention in nephrotic syndrome. pubmed:29042083 |
Aus der Medizinischen Universitätsklinik | diss_Menacher word |
Acta Physiologica | Plasminogen deficiency does not prevent sodium retention in a genetic mouse model of experimental nephrotic syndrome Pubmed: 32455507 |
Evaluation of The Relationship Between Apelin 36 and Oxidative Stress In Patients With General Anxiety Disorder |
Catalog No. | Related products for research use of Sus scrofa; Porcine (Pig) Organism species | Applications (RESEARCH USE ONLY!) |
APA968Po62 | Active Aprotinin (AP) | Cell culture; Activity Assays. |
RPA968Po02 | Recombinant Aprotinin (AP) | Positive Control; Immunogen; SDS-PAGE; WB. |
RPA968Po03 | Recombinant Aprotinin (AP) | Positive Control; Immunogen; SDS-PAGE; WB. |
EPA968Po61 | Eukaryotic Aprotinin (AP) | Positive Control; Immunogen; SDS-PAGE; WB. |
APA968Po61 | Active Aprotinin (AP) | Cell culture; Activity Assays. |
EPA968Po62 | Eukaryotic Aprotinin (AP) | Positive Control; Immunogen; SDS-PAGE; WB. |
RPA968Po01 | Recombinant Aprotinin (AP) | Positive Control; Immunogen; SDS-PAGE; WB. |
PAA968Po01 | Polyclonal Antibody to Aprotinin (AP) | WB; IHC; ICC; IP. |
MAA968Po21 | Monoclonal Antibody to Aprotinin (AP) | WB; IHC; ICC; IP. |
CEA968Po | ELISA Kit for Aprotinin (AP) | Enzyme-linked immunosorbent assay for Antigen Detection. |
LMA968Po | Multiplex Assay Kit for Aprotinin (AP) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |