Packages (Simulation)
Reagent Preparation
Image (I)
-
Results demonstration
Image (II)
-
Typical Standard Curve
Quality Guarantee
Instruction Manual
Certificate
Maybe you can also pay attention to our smart microplate reader
High Sensitive ELISA Kit for Receptor Interacting Serine Threonine Kinase 1 (RIPK1)
RIP; Receptor-Interacting Protein; Cell death protein RIP; Serine/threonine-protein kinase RIP
- Product No.HEE640Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- Sample Typeserum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Test MethodDouble-antibody Sandwich
- Assay Length3h
- Detection Range0.156-10ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.055ng/mL.
- DownloadInstruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
- FOB
US$ 539
US$ 770
US$ 3465
US$ 6545
US$ 53900
For more details, please contact local distributors!
Specificity
This assay has high sensitivity and excellent specificity for detection of High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1).
No significant cross-reactivity or interference between High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) and analogues was observed.
Recovery
Matrices listed below were spiked with certain level of recombinant High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) in samples.
| Matrix | Recovery range (%) | Average(%) |
| serum(n=5) | 79-95 | 82 |
| EDTA plasma(n=5) | 78-92 | 89 |
| heparin plasma(n=5) | 84-93 | 88 |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Receptor Interacting Serine Threonine Kinase 1 (RIPK1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
| Sample | 1:2 | 1:4 | 1:8 | 1:16 |
| serum(n=5) | 96-104% | 89-101% | 79-89% | 91-105% |
| EDTA plasma(n=5) | 86-101% | 86-93% | 84-99% | 90-104% |
| heparin plasma(n=5) | 82-97% | 89-97% | 92-101% | 80-101% |
Stability
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Reagents and materials provided
| Reagents | Quantity | Reagents | Quantity |
| Pre-coated, ready to use 96-well strip plate | 1 | Plate sealer for 96 wells | 4 |
| Standard | 2 | Standard Diluent | 1×20mL |
| Detection Reagent A | 1×120µL | Assay Diluent A | 1×12mL |
| Detection Reagent B | 1×120µL | Assay Diluent B | 1×12mL |
| TMB Substrate | 1×9mL | Stop Solution | 1×6mL |
| Wash Buffer (30 × concentrate) | 1×20mL | Instruction manual | 1 |
Assay procedure summary
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.
GIVEAWAYS
INCREMENT SERVICES
| Magazine | Citations |
| Atherosclerosis | Vascular peroxide 1 promotes ox-LDL-induced programmed necrosis in endothelial cells through a mechanism involving β-catenin signaling Pubmed:29772481 |
| Cell and Tissue Research | Isolation and characterization of cluster of differentiation 9-positive ependymal cells as potential adult neural stem/progenitor cells in the third ventricle of adult rats Pubmed: 31788760 |
| Am J Respir Cell Mol Biol | Persistently Elevated Plasma Levels of RIPK3, MLKL, HMGB1, and RIPK1 in COVID-19 ICU Patients Pubmed:35385375 |