ELISA Kit for Angiogenin (ANG)

RNASE5; Ribonuclease,RNase A Family 5


This assay has high sensitivity and excellent specificity for detection of Angiogenin (ANG).
No significant cross-reactivity or interference between Angiogenin (ANG) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Angiogenin (ANG) and the recovery rates were calculated by comparing the measured value to the expected amount of Angiogenin (ANG) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 85-99 88
EDTA plasma(n=5) 80-96 82
heparin plasma(n=5) 96-103 101


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Angiogenin (ANG) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Angiogenin (ANG) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Angiogenin (ANG) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 90-99% 78-99% 89-98% 93-102%
EDTA plasma(n=5) 78-103% 98-105% 88-95% 93-101%
heparin plasma(n=5) 91-103% 79-99% 88-102% 78-98%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.



Magazine Citations
Inflammopharmacology Evening primrose oil and celecoxib inhibited pathological angiogenesis, inflammation, and oxidative stress in adjuvant-induced arthritis: novel role of angiopoietin-1 Pubmed: 24664592
Cancer Cell Angiogenin/Ribonuclease 5 is an EGFR ligand and a serum biomarker for erlotinib sensitivity in pancreatic cancer Pubmed:29606349
Journal of Immunotherapy The VE-PTP Inhibitor AKB-9778 Improves Antitumor Activity and Diminishes the Toxicity of Interleukin 2 (IL-2) Administration Pubmed: 31348125
Catalog No. Related products for research use of Bos taurus; Bovine (Cattle) Organism species Applications (RESEARCH USE ONLY!)
RPA007Bo01 Recombinant Angiogenin (ANG) Positive Control; Immunogen; SDS-PAGE; WB.
PAA007Bo01 Polyclonal Antibody to Angiogenin (ANG) WB; IHC; ICC; IP.
LAA007Bo81 FITC-Linked Polyclonal Antibody to Angiogenin (ANG) WB; IHC; ICC; IF.
LAA007Bo71 Biotin-Linked Polyclonal Antibody to Angiogenin (ANG) WB; IHC; ICC.
MAA007Bo22 Monoclonal Antibody to Angiogenin (ANG) WB; IHC; ICC; IP.
SEA007Bo ELISA Kit for Angiogenin (ANG) Enzyme-linked immunosorbent assay for Antigen Detection.