ELISA Kit for A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8)

ADAM-TS8; METH2

Specificity

This assay has high sensitivity and excellent specificity for detection of A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8).
No significant cross-reactivity or interference between A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPK208Hu01 Recombinant A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) Positive Control; Immunogen; SDS-PAGE; WB.
PAK208Hu01 Polyclonal Antibody to A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) WB; IHC; ICC; IP.
LAK208Hu71 Biotin-Linked Polyclonal Antibody to A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) WB; IHC; ICC.
SEK208Hu ELISA Kit for A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) Enzyme-linked immunosorbent assay for Antigen Detection.
LMK208Hu Multiplex Assay Kit for A Disintegrin And Metalloproteinase With Thrombospondin 8 (ADAMTS8) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.