ELISA Kit for Dipeptidyl Peptidase 10 (DPP10)

DPL2; DPPY; DPRP3; Dipeptidylpeptidase 10(Non-Functional); Dipeptidyl peptidase IV-related protein 3; Dipeptidyl peptidase X; Dipeptidyl peptidase-like protein 2

Specificity

This assay has high sensitivity and excellent specificity for detection of Dipeptidyl Peptidase 10 (DPP10).
No significant cross-reactivity or interference between Dipeptidyl Peptidase 10 (DPP10) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Dipeptidyl Peptidase 10 (DPP10) and the recovery rates were calculated by comparing the measured value to the expected amount of Dipeptidyl Peptidase 10 (DPP10) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 97-104 101
EDTA plasma(n=5) 88-96 93
heparin plasma(n=5) 83-94 90

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Dipeptidyl Peptidase 10 (DPP10) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Dipeptidyl Peptidase 10 (DPP10) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Dipeptidyl Peptidase 10 (DPP10) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 86-101% 98-105% 89-97% 95-105%
EDTA plasma(n=5) 85-101% 80-96% 81-94% 85-93%
heparin plasma(n=5) 96-104% 79-105% 78-99% 89-96%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Annals of Allergy, Asthma &amp; Immunology Dipeptidyl-peptidase 10 as a genetic biomarker for the aspirin-exacerbated respiratory disease phenotype Pubmed:25592153
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPG443Hu01 Recombinant Dipeptidyl Peptidase 10 (DPP10) Positive Control; Immunogen; SDS-PAGE; WB.
PAG443Hu01 Polyclonal Antibody to Dipeptidyl Peptidase 10 (DPP10) WB; IHC; ICC; IP.
MAG443Hu21 Monoclonal Antibody to Dipeptidyl Peptidase 10 (DPP10) WB; IHC; ICC; IP.
SEG443Hu ELISA Kit for Dipeptidyl Peptidase 10 (DPP10) Enzyme-linked immunosorbent assay for Antigen Detection.
LMG443Hu Multiplex Assay Kit for Dipeptidyl Peptidase 10 (DPP10) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.