ELISA Kit for Solute Carrier Family 30 Member 8 (SLC30A8)

ZNT8; Zinc Transporter 8

Specificity

This assay has high sensitivity and excellent specificity for detection of Solute Carrier Family 30 Member 8 (SLC30A8).
No significant cross-reactivity or interference between Solute Carrier Family 30 Member 8 (SLC30A8) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Solute Carrier Family 30 Member 8 (SLC30A8) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Solute Carrier Family 30 Member 8 (SLC30A8) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Association of Zinc Transporter-8 Autoantibody (ZnT8A) with Type 1 Diabetes Mellitus Pubmed: 32292675
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPE490Hu01 Recombinant Solute Carrier Family 30 Member 8 (SLC30A8) Positive Control; Immunogen; SDS-PAGE; WB.
RPE490Hu03 Recombinant Solute Carrier Family 30 Member 8 (SLC30A8) Positive Control; Immunogen; SDS-PAGE; WB.
RPE490Hu02 Recombinant Solute Carrier Family 30 Member 8 (SLC30A8) Positive Control; Immunogen; SDS-PAGE; WB.
RPE490Hu05 Recombinant Solute Carrier Family 30 Member 8 (SLC30A8) Positive Control; Immunogen; SDS-PAGE; WB.
RPE490Hu04 Recombinant Solute Carrier Family 30 Member 8 (SLC30A8) Positive Control; Immunogen; SDS-PAGE; WB.
PAE490Hu02 Polyclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC; IP.
PAE490Hu05 Polyclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC; IP.
PAE490Hu01 Polyclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB
LAE490Hu81 FITC-Linked Polyclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC; IF.
LAE490Hu71 Biotin-Linked Polyclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC.
MAE490Hu22 Monoclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC; IP.
LAE490Hu82 FITC-Linked Monoclonal Antibody to Solute Carrier Family 30 Member 8 (SLC30A8) WB; IHC; ICC; IF.
SEE490Hu ELISA Kit for Solute Carrier Family 30 Member 8 (SLC30A8) Enzyme-linked immunosorbent assay for Antigen Detection.
AEE490Hu ELISA Kit for Anti-Solute Carrier Family 30 Member 8 Antibody (Anti-SLC30A8) Enzyme-linked immunosorbent assay for Antibody Detection.