≡

ELISA Kit for Perilipin 1 (PLIN1)

PERI; PLIN1; Lipid Droplet Associated Protein

Specificity

This assay has high sensitivity and excellent specificity for detection of Perilipin 1 (PLIN1).
No significant cross-reactivity or interference between Perilipin 1 (PLIN1) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Perilipin 1 (PLIN1) and the recovery rates were calculated by comparing the measured value to the expected amount of Perilipin 1 (PLIN1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 96-105 101
EDTA plasma(n=5) 79-92 84
heparin plasma(n=5) 79-91 85

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Perilipin 1 (PLIN1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Perilipin 1 (PLIN1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Perilipin 1 (PLIN1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 95-102% 84-104% 95-102% 98-105%
EDTA plasma(n=5) 80-92% 84-101% 90-102% 81-96%
heparin plasma(n=5) 88-102% 85-96% 96-103% 94-103%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Ther Apher Dial Perilipin-1 in hemodialyzed patients: association with history of coronary heart disease and lipid profile PubMed: 22817124
Food Chem Cranberries (Oxycoccus quadripetalus) inhibit lipid metabolism and modulate leptin and adiponectin secretion in 3T3-L1 adipocytes PubMed: 25952883
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPC745Mu01 Recombinant Perilipin 1 (PLIN1) Positive Control; Immunogen; SDS-PAGE; WB.
RPC745Mu02 Recombinant Perilipin 1 (PLIN1) Positive Control; Immunogen; SDS-PAGE; WB.
APC745Mu61 Active Perilipin 1 (PLIN1) Cell culture; Activity Assays.
EPC745Mu61 Eukaryotic Perilipin 1 (PLIN1) Positive Control; Immunogen; SDS-PAGE; WB.
PAC745Mu01 Polyclonal Antibody to Perilipin 1 (PLIN1) WB; IHC; ICC; IP.
PAC745Mu02 Polyclonal Antibody to Perilipin 1 (PLIN1) WB; IHC; ICC; IP.
SEC745Mu ELISA Kit for Perilipin 1 (PLIN1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC745Mu Multiplex Assay Kit for Perilipin 1 (PLIN1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.