ELISA Kit for Signal Transducer And Activator Of Transcription 3 (STAT3)

APRF; Acute-Phase Response Factor

Specificity

This assay has high sensitivity and excellent specificity for detection of Signal Transducer And Activator Of Transcription 3 (STAT3).
No significant cross-reactivity or interference between Signal Transducer And Activator Of Transcription 3 (STAT3) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Signal Transducer And Activator Of Transcription 3 (STAT3) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Signal Transducer And Activator Of Transcription 3 (STAT3) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Pharmaceutics Oleacein and Foam Cell Formation in Human Monocyte-Derived Macrophages: A Potential Strategy Against Early and Advanced Atherosclerotic Lesions Pubmed: 32283795
CLINICAL IMMUNOLOGY Serum ERK1/2 proteins fluctuating with HBV infection report frequency of viral-specific CD8+ T cells and predict IFNα therapeutic effect in chronic hepatitis B patients Pubmed: 32791312
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB743Hu01 Recombinant Signal Transducer And Activator Of Transcription 3 (STAT3) Positive Control; Immunogen; SDS-PAGE; WB.
APB743Hu01 Active Signal Transducer And Activator Of Transcription 3 (STAT3) Cell culture; Activity Assays.
RPB743Hu02 Recombinant Signal Transducer And Activator Of Transcription 3 (STAT3) Positive Control; Immunogen; SDS-PAGE; WB.
PAB743Hu01 Polyclonal Antibody to Signal Transducer And Activator Of Transcription 3 (STAT3) WB; IHC; ICC/IF
SEB743Hu ELISA Kit for Signal Transducer And Activator Of Transcription 3 (STAT3) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB743Hu Multiplex Assay Kit for Signal Transducer And Activator Of Transcription 3 (STAT3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB743Hu01 ELISA Kit DIY Materials for Signal Transducer And Activator Of Transcription 3 (STAT3) Main materials for "Do It (ELISA Kit) Yourself".