≡

ELISA Kit for Glycocalicin (GC)

Carbohydrate-Rich Portion of Platelet Membrane Glycoprotein Ib Alpha Polypeptide

Specificity

This assay has high sensitivity and excellent specificity for detection of Glycocalicin (GC).
No significant cross-reactivity or interference between Glycocalicin (GC) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Glycocalicin (GC) and the recovery rates were calculated by comparing the measured value to the expected amount of Glycocalicin (GC) in samples.

Matrix Recovery range (%) Average(%)
sodium citrate plasma(n=5) 85-105 99

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Glycocalicin (GC) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Glycocalicin (GC) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Glycocalicin (GC) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
sodium citrate plasma(n=5) 96-104% 87-95% 79-89% 82-90%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Nanoscale. A factor VIII-derived peptide enables von Willebrand factor (VWF)-binding of artificial platelet nanoconstructs without interfering with VWF-adhesion of natural platelets Pubmed:Pmc4300948
Thrombosis Research Factors associated with the platelet count in patients with chronic hepatitis C Pubmed:25728497
Proteomics Clinical Applications iTRAQ‐Based Proteomic Analysis Reveals Protein Profile in Plasma from Children with Autism Pubmed:29274201
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB710Hu01 Recombinant Glycocalicin (GC) Positive Control; Immunogen; SDS-PAGE; WB.
PAB710Hu01 Polyclonal Antibody to Glycocalicin (GC) WB; IHC; ICC; IP.
LAB710Hu71 Biotin-Linked Polyclonal Antibody to Glycocalicin (GC) WB; IHC; ICC.
SEB710Hu ELISA Kit for Glycocalicin (GC) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB710Hu Multiplex Assay Kit for Glycocalicin (GC) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.