≡

ELISA Kit for Lymphocyte Function Associated Antigen 1 Alpha (CD11a)

LFA1a; ITG-AL; LFA-1; LFA1-A; ITGAL; Integrin,Alpha L; CD11 antigen-like family member A; Leukocyte function-associated molecule 1 alpha chain

Specificity

This assay has high sensitivity and excellent specificity for detection of Lymphocyte Function Associated Antigen 1 Alpha (CD11a).
No significant cross-reactivity or interference between Lymphocyte Function Associated Antigen 1 Alpha (CD11a) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Lymphocyte Function Associated Antigen 1 Alpha (CD11a) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Lymphocyte Function Associated Antigen 1 Alpha (CD11a) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
JOURNAL OF PERIODONTAL RESEARCH Salivary Del‐1, IL‐17, and LFA‐1 levels in periodontal health and disease Pubmed: 32153040
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB572Hu01 Recombinant Lymphocyte Function Associated Antigen 1 Alpha (CD11a) Positive Control; Immunogen; SDS-PAGE; WB.
PAB572Hu01 Polyclonal Antibody to Lymphocyte Function Associated Antigen 1 Alpha (CD11a) WB; IHC; ICC; IP.
FAB572Hu01 Anti-Lymphocyte Function Associated Antigen 1 Alpha (CD11a) Polyclonal Antibody Flow cytometry.
MAB572Hu22 Monoclonal Antibody to Lymphocyte Function Associated Antigen 1 Alpha (CD11a) WB; IHC; ICC; IP.
RAB572Hu21 Recombinant Antibody to Lymphocyte Function Associated Antigen 1 Alpha (CD11a) WB; IF; ICC; IHC; IP; FCM.
SEB572Hu ELISA Kit for Lymphocyte Function Associated Antigen 1 Alpha (CD11a) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB572Hu Multiplex Assay Kit for Lymphocyte Function Associated Antigen 1 Alpha (CD11a) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB572Hu01 ELISA Kit DIY Materials for Lymphocyte Function Associated Antigen 1 Alpha (CD11a) Main materials for "Do It(ELISA Kit) Yourself"