ELISA Kit for Bone Morphogenetic Protein 7 (BMP7)

OP1; Osteogenic Protein-1; Eptotermin alfa

Specificity

This assay has high sensitivity and excellent specificity for detection of Bone Morphogenetic Protein 7 (BMP7).
No significant cross-reactivity or interference between Bone Morphogenetic Protein 7 (BMP7) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Bone Morphogenetic Protein 7 (BMP7) and the recovery rates were calculated by comparing the measured value to the expected amount of Bone Morphogenetic Protein 7 (BMP7) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 90-104 101
EDTA plasma(n=5) 79-97 88
heparin plasma(n=5) 95-102 98

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Bone Morphogenetic Protein 7 (BMP7) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Bone Morphogenetic Protein 7 (BMP7) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Bone Morphogenetic Protein 7 (BMP7) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 90-98% 79-90% 83-93% 97-105%
EDTA plasma(n=5) 95-102% 94-101% 99-105% 87-104%
heparin plasma(n=5) 99-105% 80-104% 87-103% 99-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
PLoS ONE A Combinatorial Relative Mass Value Evaluation of Endogenous Bioactive Proteins in Three-Dimensional Cultured Nucleus Pulposus Cells of Herniated Intervertebral Discs: Identification of Potential Target Proteins for Gene Therapeutic Approaches Plosone: Source
BioMed Research International Serum Heme Oxygenase-1 and BMP-7 Are Potential Biomarkers for Bone Metabolism in Patients with Rheumatoid Arthritis and Ankylosing Spondylitis Pubmed:27314037
ENVIRONMENTAL TOXICOLOGY AND PHARMACOLOGY The dose-time effects of fluoride on the expression and DNA methylation level of the promoter region of BMP-2 and BMP-7 in rats Pubmed: 32004919
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES Temporal TGF-β Supergene Family Signalling Cues Modulating Tissue Morphogenesis: Chondrogenesis within a Muscle Tissue Model? Pubmed: 32660137
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPA799Hu01 Recombinant Bone Morphogenetic Protein 7 (BMP7) Positive Control; Immunogen; SDS-PAGE; WB.
EPA799Hu61 Eukaryotic Bone Morphogenetic Protein 7 (BMP7) Positive Control; Immunogen; SDS-PAGE; WB.
RPA799Hu02 Recombinant Bone Morphogenetic Protein 7 (BMP7) Positive Control; Immunogen; SDS-PAGE; WB.
APA799Hu01 Active Bone Morphogenetic Protein 7 (BMP7) Cell culture; Activity Assays.
PAA799Hu01 Polyclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
PAA799Hu02 Polyclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
MAA799Hu22 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB
MAA799Hu24 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
MAA799Hu23 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
MAA799Hu21 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
MAA799Hu25 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
MAA799Hu27 Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC; IP.
LAA799Hu72 Biotin-Linked Monoclonal Antibody to Bone Morphogenetic Protein 7 (BMP7) WB; IHC; ICC.
SEA799Hu ELISA Kit for Bone Morphogenetic Protein 7 (BMP7) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA799Hu Multiplex Assay Kit for Bone Morphogenetic Protein 7 (BMP7) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSA799Hu01 Antibody Pair for Bone Morphogenetic Protein 7 (BMP7) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSA799Hu01 ELISA Kit DIY Materials for Bone Morphogenetic Protein 7 (BMP7) Main materials for "Do It(ELISA Kit) Yourself"