≡

CLIA Kit for RAB1A, Member RAS Oncogene Family (RAB1A)

RAB1; YPT1; Ras-related protein Rab-1A; YPT1-related protein

Specificity

This assay has high sensitivity and excellent specificity for detection of RAB1A, Member RAS Oncogene Family (RAB1A).
No significant cross-reactivity or interference between RAB1A, Member RAS Oncogene Family (RAB1A) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level RAB1A, Member RAS Oncogene Family (RAB1A) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level RAB1A, Member RAS Oncogene Family (RAB1A) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPJ783Hu01 Recombinant RAB1A, Member RAS Oncogene Family (RAB1A) Positive Control; Immunogen; SDS-PAGE; WB.
PAJ783Hu01 Polyclonal Antibody to RAB1A, Member RAS Oncogene Family (RAB1A) WB; IHC; ICC; IP.
MAJ783Hu21 Monoclonal Antibody to RAB1A, Member RAS Oncogene Family (RAB1A) WB; IHC; ICC; IP.
SEJ783Hu ELISA Kit for RAB1A, Member RAS Oncogene Family (RAB1A) Enzyme-linked immunosorbent assay for Antigen Detection.
SCJ783Hu CLIA Kit for RAB1A, Member RAS Oncogene Family (RAB1A) Chemiluminescent immunoassay for Antigen Detection.
LMJ783Hu Multiplex Assay Kit for RAB1A, Member RAS Oncogene Family (RAB1A) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.