≡

OneStep ELISA Kit for Fibrinogen Beta Chain (FGB)

FG-B; Fibrinopeptide B; Fibrinogen Beta

Specificity

This assay has high sensitivity and excellent specificity for detection of Fibrinogen Beta Chain (FGB).
No significant cross-reactivity or interference between Fibrinogen Beta Chain (FGB) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Fibrinogen Beta Chain (FGB) and the recovery rates were calculated by comparing the measured value to the expected amount of Fibrinogen Beta Chain (FGB) in samples.

Matrix Recovery range (%) Average(%)
sodium citrate plasma(n=5) 87-96 91

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fibrinogen Beta Chain (FGB) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fibrinogen Beta Chain (FGB) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Fibrinogen Beta Chain (FGB) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
sodium citrate plasma(n=5) 84-92% 86-94% 98-105% 80-104%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well, then add 50µL prepared Detection Reagent A to each well. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
5. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
United States Patent Application Compositions and Methods for Diagnosing Lung Cancer y2016:0077095.html
Microbial Pathogenesis Crystal structure of GAPDH of Streptococcus agalactiae and characterization of its interaction with extracellular matrix molecules Pubmed: 30553015
GLYCOCONJUGATE JOURNAL Nattokinase-heparin exhibits beneficial efficacy and safety—an optimal strategy for CKD patients on hemodialysis Pubmed: 30788657
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB215Mu01 Recombinant Fibrinogen Beta Chain (FGB) Positive Control; Immunogen; SDS-PAGE; WB.
APB215Mu01 Active Fibrinogen Beta Chain (FGB) Cell culture; Activity Assays.
RPB215Mu02 Recombinant Fibrinogen Beta Chain (FGB) Positive Control; Immunogen; SDS-PAGE; WB.
PAB215Mu01 Polyclonal Antibody to Fibrinogen Beta Chain (FGB) WB; IHC
PAB215Mu02 Polyclonal Antibody to Fibrinogen Beta Chain (FGB) WB; IHC; ICC; IP.
MEB215Mu Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB) Enzyme-linked immunosorbent assay for Antigen Detection.
SEB215Mu ELISA Kit for Fibrinogen Beta Chain (FGB) Enzyme-linked immunosorbent assay for Antigen Detection.
OEB215Mu OneStep ELISA Kit for Fibrinogen Beta Chain (FGB) Enzyme-linked immunosorbent assay for Antigen Detection.
CMB215Mu Multiplex Assay Kit for Fibrinogen Beta Chain (FGB) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
LMB215Mu Multiplex Assay Kit for Fibrinogen Beta Chain (FGB) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB215Mu01 ELISA Kit DIY Materials for Fibrinogen Beta Chain (FGB) Main materials for "Do It (ELISA Kit) Yourself".