Multiplex Assay Kit for Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array)

ALK1; ALP; MPI; BLPI; HUSI; HUSI-I; WAP4; WFDC4; Antileukoproteinase; Seminal proteinase inhibitor; Mucus proteinase inhibitor; WAP four-disulfide core domain protein 4

Specificity

This assay has high sensitivity and excellent specificity for detection of Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 81-96 93
EDTA plasma(n=5) 97-105 101
heparin plasma(n=5) 96-104 101

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 83-93% 87-95% 78-95% 89-97%
EDTA plasma(n=5) 80-95% 79-91% 78-94% 78-98%
heparin plasma(n=5) 80-97% 83-91% 92-102% 94-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Human Immunology Serum alarm antiproteases in systemic sclerosis patients pubmed:28606626
The Journal of Toxicological Sciences Editor's Highlight: Candidate Risk Factors and Mechanisms for Tolvaptan-Induced Liver Injury Are Identified Using a Collaborative Cross Approach pubmed:28115652
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
EPB312Mu61 Eukaryotic Secretory Leukocyte Peptidase Inhibitor (SLPI) Positive Control; Immunogen; SDS-PAGE; WB.
RPB312Mu01 Recombinant Secretory Leukocyte Peptidase Inhibitor (SLPI) Positive Control; Immunogen; SDS-PAGE; WB.
RPB312Mu02 Recombinant Secretory Leukocyte Peptidase Inhibitor (SLPI) Positive Control; Immunogen; SDS-PAGE; WB.
PAB312Mu01 Polyclonal Antibody to Secretory Leukocyte Peptidase Inhibitor (SLPI) WB,IHC
PAB312Mu02 Polyclonal Antibody to Secretory Leukocyte Peptidase Inhibitor (SLPI) WB; IHC; ICC; IP.
LAB312Mu81 FITC-Linked Polyclonal Antibody to Secretory Leukocyte Peptidase Inhibitor (SLPI) WB; IHC; ICC; IF.
LAB312Mu71 Biotin-Linked Polyclonal Antibody to Secretory Leukocyte Peptidase Inhibitor (SLPI) IHC
SEB312Mu ELISA Kit for Secretory Leukocyte Peptidase Inhibitor (SLPI) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB312Mu CLIA Kit for Secretory Leukocyte Peptidase Inhibitor (SLPI) Chemiluminescent immunoassay for Antigen Detection.
LMB312Mu Multiplex Assay Kit for Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMB312Mu Multiplex Assay Kit for Secretory Leukocyte Peptidase Inhibitor (SLPI) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
KSB312Mu01 ELISA Kit DIY Materials for Secretory Leukocyte Peptidase Inhibitor (SLPI) Main materials for "Do It (ELISA Kit) Yourself".