Multiplex Assay Kit for Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array)

SERPING1; C1IN; C1-INH; C1NH; HAE1; HAE2; Serpin Peptidase Inhibitor Clade G Member 1; Angioedema Hereditary; C1 Inhibitor; C1 Esterase Inhibitor

Specificity

This assay has high sensitivity and excellent specificity for detection of Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-89 85
EDTA plasma(n=5) 87-94 90
heparin plasma(n=5) 97-105 101

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 89-103% 80-95% 84-99% 98-105%
EDTA plasma(n=5) 78-93% 80-92% 84-91% 86-93%
heparin plasma(n=5) 85-105% 97-105% 96-103% 83-94%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Brain Res Bull Association of increase in Serping1 level with dopaminergic cell reduction in an MPTP-induced Parkinson's disease mouse model Pubmed: 32485229
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPA235Mu01 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu02 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu03 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu04 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu05 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu06 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu07 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu08 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
PAA235Mu01 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB,IHC
PAA235Mu04 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC
PAA235Mu05 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB
PAA235Mu03 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) IHC
PAA235Mu02 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB,IHC
FAA235Mu03 Anti-Complement 1 Inhibitor (C1INH) Polyclonal Antibody FCM
LAA235Mu71 Biotin-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC.
LAA235Mu81 FITC-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IF.
SEA235Mu ELISA Kit for Complement 1 Inhibitor (C1INH) Enzyme-linked immunosorbent assay for Antigen Detection.
MEA235Mu Mini Samples ELISA Kit for Complement 1 Inhibitor (C1INH) Enzyme-linked immunosorbent assay for Antigen Detection.
CMA235Mu Multiplex Assay Kit for Complement 1 Inhibitor (C1INH) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
LMA235Mu Multiplex Assay Kit for Complement 1 Inhibitor (C1INH) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.