Multiplex Assay Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array)

CSF3; G-CSF; Granulocyte Colony Stimulating Factor; Pluripoietin; Filgrastim; Lenograstim

Specificity

This assay has high sensitivity and excellent specificity for detection of Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 83-104 90
EDTA plasma(n=5) 97-104 101
heparin plasma(n=5) 78-98 87

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 92-103% 80-102% 80-102% 95-103%
EDTA plasma(n=5) 91-101% 79-93% 92-101% 80-98%
heparin plasma(n=5) 85-104% 95-105% 88-97% 88-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Scientific Reports The Transcriptional Foundations of Sp110-mediated Macrophage (RAW264. 7) Resistance to Mycobacterium tuberculosis H37Ra Pubmed:26912204
International Journal of Clinical and Experimental Pathology Low-density neutrophils in severe fever with thrombocytopenia syndrome (SFTS) display decreased function to phagocytose SFTS virus and enhanced capacity to synthesize cytokines ISSN:1936-2625/IJCEP0045334
International Immunopharmacology Ginsenoside Rg3 improves cyclophosphamide-induced immunocompetence in Balb/c mice Pubmed: 30974284
Mol Immunol Oridonin alleviates kanamycin-related hearing loss by inhibiting NLRP3/caspase-1/gasdermin D-induced inflammasome activation and hair cell pyroptosis Pubmed:35749835
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
APA042Hu02 Active Colony Stimulating Factor 3, Granulocyte (GCSF) Cell culture; Activity Assays.
APA042Hu01 Active Colony Stimulating Factor 3, Granulocyte (GCSF) Cell culture; Activity Assays.
RPA042Hu02 Recombinant Colony Stimulating Factor 3, Granulocyte (GCSF) Positive Control; Immunogen; SDS-PAGE; WB.
RPA042Hu01 Recombinant Colony Stimulating Factor 3, Granulocyte (GCSF) Positive Control; Immunogen; SDS-PAGE; WB.
PAA042Hu01 Polyclonal Antibody to Colony Stimulating Factor 3, Granulocyte (GCSF) WB,ICC/IF
PAA042Hu02 Polyclonal Antibody to Colony Stimulating Factor 3, Granulocyte (GCSF) WB; IHC; ICC; IP.
MAA042Hu22 Monoclonal Antibody to Colony Stimulating Factor 3, Granulocyte (GCSF) WB; IHC; ICC; IP.
SEA042Hu ELISA Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) Enzyme-linked immunosorbent assay for Antigen Detection.
MEA042Hu Mini Samples ELISA Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) Enzyme-linked immunosorbent assay for Antigen Detection.
AEA042Hu ELISA Kit for Anti-Colony Stimulating Factor 3, Granulocyte Antibody (Anti-GCSF) Enzyme-linked immunosorbent assay for Antibody Detection.
SCA042Hu CLIA Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) Chemiluminescent immunoassay for Antigen Detection.
LMA042Hu Multiplex Assay Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMA042Hu Multiplex Assay Kit for Colony Stimulating Factor 3, Granulocyte (GCSF) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
PGA042Hu02 Primer Pair for Colony Stimulating Factor 3, Granulocyte (GCSF) PCR