Multiplex Assay Kit for Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array)

CD178; CD95L; CD95-L; FASLG; FASLG; APT1LG1; APT1-LG1; TNFSF6; Fas Antigen Ligand; TNF Superfamily Member 6; Tumor Necrosis Factor(ligand)Superfamily,Member 6

Specificity

This assay has high sensitivity and excellent specificity for detection of Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array).
No significant cross-reactivity or interference between Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) and the recovery rates were calculated by comparing the measured value to the expected amount of Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-89 85
EDTA plasma(n=5) 96-104 101
heparin plasma(n=5) 92-101 96

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 89-102% 92-101% 80-105% 85-98%
EDTA plasma(n=5) 98-105% 86-93% 96-103% 78-93%
heparin plasma(n=5) 90-104% 92-101% 79-95% 98-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity

Assay procedure summary

1. Add 200μL analysis buffer solution to each well of the plate for pre-wetting;
2. Preparation of standards, reagents and samples before the experiment;
3. Add 100μL standard or sample to each well, add 10μL magnetic beads, and incubate 120 minutes protect from light at 25°C on shaker;
4. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60 minutes protect from light at 25°C on shaker;
5. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent B, and incubate 30 minutes protect from light at 25°C on shaker;
6. Wash plate once on magnetic frame;
7. Add 100μL sheath fluid, swirl for 10 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
PLoS Pathogens Macrophage-expressed IFN-β Contributes to Apoptotic Alveolar Epithelial Cell Injury in Severe Influenza Virus Pneumonia PubMed: PMC3585175
Tumor Biology The diplotype Fas? 1377A/? 670G as a genetic marker to predict a lower risk of breast cancer in Chinese women Springer:Source
IOS Press Content Library An Intranasal Formulation of Erythropoietin (Neuro-EPO) Prevents Memory Deficits and Amyloid Toxicity in the APPSwe Transgenic Mouse Model of Alzheimer's … articles:journal-of-alzheimers-disease
博士论文 INSTITUTO DE CIENCIAS BÁSICAS Y PRECLÍNICAS “VICTORIA DE GIRÓN” DEPARTAMENTO DE HISTOLOGÍA
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
APA031Hu61 Active Factor Related Apoptosis Ligand (FASL) Cell culture; Activity Assays.
RPA031Hu01 Recombinant Factor Related Apoptosis Ligand (FASL) Positive Control; Immunogen; SDS-PAGE; WB.
RPA031Hu02 Recombinant Factor Related Apoptosis Ligand (FASL) Positive Control; Immunogen; SDS-PAGE; WB.
APA031Hu01 Active Factor Related Apoptosis Ligand (FASL) Cell culture; Activity Assays.
PAA031Hu02 Polyclonal Antibody to Factor Related Apoptosis Ligand (FASL) WB; IHC; ICC/IF
PAA031Hu01 Polyclonal Antibody to Factor Related Apoptosis Ligand (FASL) IHC
FAA031Hu01 Anti-Factor Related Apoptosis Ligand (FASL) Polyclonal Antibody Flow cytometry.
LAA031Hu71 Biotin-Linked Polyclonal Antibody to Factor Related Apoptosis Ligand (FASL) WB; IHC; ICC.
MAA031Hu22 Monoclonal Antibody to Factor Related Apoptosis Ligand (FASL) WB; IHC; ICC; IP.
SEA031Hu ELISA Kit for Factor Related Apoptosis Ligand (FASL) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA031Hu Multiplex Assay Kit for Factor Related Apoptosis Ligand (FASL) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
CMA031Hu Multiplex Assay Kit for Factor Related Apoptosis Ligand (FASL) ,etc. by CBA (Cytometric Bead Array) FLIA Kit for Antigen Detection.
KSA031Hu01 ELISA Kit DIY Materials for Factor Related Apoptosis Ligand (FASL) Main materials for "Do It (ELISA Kit) Yourself".