ELISA Kit for Klotho Beta (KLb)

Klotho beta-like protein

Specificity

This assay has high sensitivity and excellent specificity for detection of Klotho Beta (KLb).
No significant cross-reactivity or interference between Klotho Beta (KLb) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Klotho Beta (KLb) and the recovery rates were calculated by comparing the measured value to the expected amount of Klotho Beta (KLb) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 81-98 85
EDTA plasma(n=5) 86-93 89
heparin plasma(n=5) 88-101 97

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Klotho Beta (KLb) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Klotho Beta (KLb) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Klotho Beta (KLb) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 79-105% 80-88% 93-104% 80-99%
EDTA plasma(n=5) 82-94% 80-99% 80-96% 78-101%
heparin plasma(n=5) 88-96% 79-99% 84-91% 81-93%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
oncology reports Clinical significance of α‑ and β‑Klotho in urothelial carcinoma of the bladder. pubmed:27573985
Journal of Diabetes and its Complications Clinical implication of alterations in serum Klotho levels in patients with type 2 diabetes mellitus and its associated complications Pubmed:30042059
Chinese medical journal Protection Effect of Exogenous Fibroblast Growth Factor 21 on the Kidney Injury in Vascular Calcification Rats Pubmed:29483386
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPH756Mu03 Recombinant Klotho Beta (KLb) Positive Control; Immunogen; SDS-PAGE; WB.
RPH756Mu02 Recombinant Klotho Beta (KLb) Positive Control; Immunogen; SDS-PAGE; WB.
RPH756Mu01 Recombinant Klotho Beta (KLb) Positive Control; Immunogen; SDS-PAGE; WB.
PAH756Mu03 Polyclonal Antibody to Klotho Beta (KLb) WB; IHC; ICC; IP.
PAH756Mu01 Polyclonal Antibody to Klotho Beta (KLb) WB; IHC; ICC; IP.
PAH756Mu02 Polyclonal Antibody to Klotho Beta (KLb) WB; IHC; ICC; IP.
LAH756Mu71 Biotin-Linked Polyclonal Antibody to Klotho Beta (KLb) WB; IHC; ICC.
SEH756Mu ELISA Kit for Klotho Beta (KLb) Enzyme-linked immunosorbent assay for Antigen Detection.
LMH756Mu Multiplex Assay Kit for Klotho Beta (KLb) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.