ELISA Kit for Sulfite Oxidase (SUOX)


This assay has high sensitivity and excellent specificity for detection of Sulfite Oxidase (SUOX).
No significant cross-reactivity or interference between Sulfite Oxidase (SUOX) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Sulfite Oxidase (SUOX) and the recovery rates were calculated by comparing the measured value to the expected amount of Sulfite Oxidase (SUOX) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 98-105 102
EDTA plasma(n=5) 85-92 89
heparin plasma(n=5) 86-95 90


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Sulfite Oxidase (SUOX) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Sulfite Oxidase (SUOX) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Sulfite Oxidase (SUOX) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 88-105% 96-104% 86-104% 97-105%
EDTA plasma(n=5) 90-102% 89-101% 94-102% 92-105%
heparin plasma(n=5) 93-104% 96-103% 83-101% 80-90%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.



Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPH097Hu01 Recombinant Sulfite Oxidase (SUOX) Positive Control; Immunogen; SDS-PAGE; WB.
PAH097Hu01 Polyclonal Antibody to Sulfite Oxidase (SUOX) WB; IHC; ICC; IP.
LAH097Hu71 Biotin-Linked Polyclonal Antibody to Sulfite Oxidase (SUOX) WB; IHC; ICC.
LAH097Hu81 FITC-Linked Polyclonal Antibody to Sulfite Oxidase (SUOX) WB; IHC; ICC; IF.
MAH097Hu21 Monoclonal Antibody to Sulfite Oxidase (SUOX) WB; IHC; ICC; IP.
SEH097Hu ELISA Kit for Sulfite Oxidase (SUOX) Enzyme-linked immunosorbent assay for Antigen Detection.
KSH097Hu01 ELISA Kit DIY Materials for Sulfite Oxidase (SUOX) Main materials for "Do It (ELISA Kit) Yourself".