ELISA Kit for Bone Marrow Stromal Cell Antigen 2 (BST2)

CD317; Tetherin; HM1.24 antigen

Specificity

This assay has high sensitivity and excellent specificity for detection of Bone Marrow Stromal Cell Antigen 2 (BST2).
No significant cross-reactivity or interference between Bone Marrow Stromal Cell Antigen 2 (BST2) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Bone Marrow Stromal Cell Antigen 2 (BST2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Bone Marrow Stromal Cell Antigen 2 (BST2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Protein Expression and Purification Expression, purification and characterization of a full-length recombinant HIV-1 Vpu frominclusion bodies. pubmed:27590917
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
EPB777Hu61 Eukaryotic Bone Marrow Stromal Cell Antigen 2 (BST2) Positive Control; Immunogen; SDS-PAGE; WB.
RPB777Hu01 Recombinant Bone Marrow Stromal Cell Antigen 2 (BST2) Positive Control; Immunogen; SDS-PAGE; WB.
PAB777Hu01 Polyclonal Antibody to Bone Marrow Stromal Cell Antigen 2 (BST2) WB; IHC; ICC; IP.
MAB777Hu22 Monoclonal Antibody to Bone Marrow Stromal Cell Antigen 2 (BST2) WB; IHC; ICC; IP.
SEB777Hu ELISA Kit for Bone Marrow Stromal Cell Antigen 2 (BST2) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB777Hu Multiplex Assay Kit for Bone Marrow Stromal Cell Antigen 2 (BST2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.