ELISA Kit for Thyroxine Binding Globulin (TBG)

SERPINA7; Serpin Peptidase Inhibitor Clade A Member 7; T4-binding globulin


This assay has high sensitivity and excellent specificity for detection of Thyroxine Binding Globulin (TBG).
No significant cross-reactivity or interference between Thyroxine Binding Globulin (TBG) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Thyroxine Binding Globulin (TBG) and the recovery rates were calculated by comparing the measured value to the expected amount of Thyroxine Binding Globulin (TBG) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 80-101 96
EDTA plasma(n=5) 97-104 101
heparin plasma(n=5) 80-101 91


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Thyroxine Binding Globulin (TBG) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Thyroxine Binding Globulin (TBG) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Thyroxine Binding Globulin (TBG) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 83-101% 93-101% 78-103% 94-101%
EDTA plasma(n=5) 98-105% 99-105% 93-101% 94-102%
heparin plasma(n=5) 99-105% 88-98% 87-97% 98-105%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.



Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPA305Hu01 Recombinant Thyroxine Binding Globulin (TBG) Positive Control; Immunogen; SDS-PAGE; WB.
PAA305Hu01 Polyclonal Antibody to Thyroxine Binding Globulin (TBG) WB; IHC; ICC; IP.
LAA305Hu81 FITC-Linked Polyclonal Antibody to Thyroxine Binding Globulin (TBG) WB; IHC; ICC; IF.
LAA305Hu71 Biotin-Linked Polyclonal Antibody to Thyroxine Binding Globulin (TBG) WB; IHC; ICC.
MAA305Hu22 Monoclonal Antibody to Thyroxine Binding Globulin (TBG) WB; IHC; ICC; IP.
SEA305Hu ELISA Kit for Thyroxine Binding Globulin (TBG) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA305Hu CLIA Kit for Thyroxine Binding Globulin (TBG) Chemiluminescent immunoassay for Antigen Detection.
KSA305Hu01 ELISA Kit DIY Materials for Thyroxine Binding Globulin (TBG) Main materials for "Do It (ELISA Kit) Yourself".