≡

CLIA Kit for Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2)

IL-1R9; IL1R9; IL1RAPL-2; TIGIRR-1; IL1RAPL-2-related protein; Interleukin-1 receptor 9; Three immunoglobulin domain-containing IL-1 receptor-related 1

Specificity

This assay has high sensitivity and excellent specificity for detection of Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2).
No significant cross-reactivity or interference between Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPH817Hu01 Recombinant Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) Positive Control; Immunogen; SDS-PAGE; WB.
PAH817Hu01 Polyclonal Antibody to Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) WB; IHC; ICC; IP.
MAH817Hu21 Monoclonal Antibody to Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) WB; IHC; ICC; IP.
SEH817Hu ELISA Kit for Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) Enzyme-linked immunosorbent assay for Antigen Detection.
SCH817Hu CLIA Kit for Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) Chemiluminescent immunoassay for Antigen Detection.
LMH817Hu Multiplex Assay Kit for Interleukin 1 Receptor Accessory Protein Like Protein 2 (IL1RAPL2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.