Mini Samples ELISA Kit for Lysozyme (LZM)

LYZ; Renal Amyloidosis; N-Acetylmuramide Glycanhydrolase; Muramidase; 1,4-beta-N-acetylmuramidase C

Specificity

This assay has high sensitivity and excellent specificity for detection of Mini Samples Lysozyme (LZM).
No significant cross-reactivity or interference between Mini Samples Lysozyme (LZM) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Mini Samples Lysozyme (LZM) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Lysozyme (LZM) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 95-105 101
EDTA plasma(n=5) 96-104 101
heparin plasma(n=5) 84-103 90

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Lysozyme (LZM) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Lysozyme (LZM) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Lysozyme (LZM) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 80-102% 89-103% 94-102% 78-89%
EDTA plasma(n=5) 96-103% 86-97% 84-98% 81-94%
heparin plasma(n=5) 81-95% 86-103% 91-99% 86-95%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×60µL Assay Diluent A 1×6mL
Detection Reagent B 1×60µL Assay Diluent B 1×6mL
TMB Substrate 1×4.5mL Stop Solution 1×3mL
Wash Buffer (30 × concentrate) 1×10mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well. Incubate 1 hour at 37°C;
3. Aspirate and add 25µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 25µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 25µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 20µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
The Journal of Nutrition Vitamin A Deficiency Induces Fluid Hyposecretion from the Airway Submucosal Glands of Mice Nutrition&Metabolism: source
Catalog No. Related products for research use of Chicken (Gallus) Organism species Applications (RESEARCH USE ONLY!)
RPB193Ga01 Recombinant Lysozyme (LZM) Positive Control; Immunogen; SDS-PAGE; WB.
PAB193Ga01 Polyclonal Antibody to Lysozyme (LZM) WB; IHC; ICC; IP.
MAB193Ga21 Monoclonal Antibody to Lysozyme (LZM) WB; IHC; ICC; IP.
SEB193Ga ELISA Kit for Lysozyme (LZM) Enzyme-linked immunosorbent assay for Antigen Detection.
MEB193Ga Mini Samples ELISA Kit for Lysozyme (LZM) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB193Ga CLIA Kit for Lysozyme (LZM) Chemiluminescent immunoassay for Antigen Detection.
KSB193Ga01 ELISA Kit DIY Materials for Lysozyme (LZM) Main materials for "Do It (ELISA Kit) Yourself".