ELISA Kit for Aprotinin (AP)

BPTI; Trasylol; Pancreatic Trypsin Inhibitor; Basic protease inhibitor


This assay has high sensitivity and excellent specificity for detection of Aprotinin (AP).
No significant cross-reactivity or interference between Aprotinin (AP) and analogues was observed.


Matrices listed below were spiked with certain level of recombinant Aprotinin (AP) and the recovery rates were calculated by comparing the measured value to the expected amount of Aprotinin (AP) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 87-94 90
EDTA plasma(n=5) 89-104 101
heparin plasma(n=5) 82-93 87


Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Aprotinin (AP) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Aprotinin (AP) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%


The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Aprotinin (AP) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-92% 97-104% 96-105% 85-99%
EDTA plasma(n=5) 78-93% 79-104% 94-104% 91-98%
heparin plasma(n=5) 80-94% 90-104% 98-105% 79-102%


The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.



Magazine Citations
24 Aprotinin prevents proteolytic epithelial sodium channel (ENaC) activation and volume retention in nephrotic syndrome. pubmed:29042083
Aus der Medizinischen Universitätsklinik diss_Menacher word
Catalog No. Related products for research use of Bos taurus; Bovine (Cattle) Organism species Applications (RESEARCH USE ONLY!)
RPA968Bo01 Recombinant Aprotinin (AP) Positive Control; Immunogen; SDS-PAGE; WB.
PAA968Bo01 Polyclonal Antibody to Aprotinin (AP) WB; IHC; ICC; IP.
LAA968Bo71 Biotin-Linked Polyclonal Antibody to Aprotinin (AP) WB; IHC; ICC.
MAA968Bo21 Monoclonal Antibody to Aprotinin (AP) WB; IHC; ICC; IP.
CEA968Bo ELISA Kit for Aprotinin (AP) Enzyme-linked immunosorbent assay for Antigen Detection.
CCA968Bo CLIA Kit for Aprotinin (AP) Chemiluminescent immunoassay for Antigen Detection.
KSA968Bo11 ELISA Kit DIY Materials for Aprotinin (AP) Main materials for "Do It (ELISA Kit) Yourself".