Mini Samples ELISA Kit for Kynurenic Acid (KYNA)
Kinurenic acid; Kynuronic acid; Kuinurenic acid; Transtorine
- Product No.MED718Ge
- Organism SpeciesPan-species (General) Same name, Different species.
- Sample TypeSerum, plasma, urine and other biological fluids
- Test MethodCompetitive Inhibition
- Assay Length3h
- Detection Range24.69-2,000ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 9.13ng/mL.
- DownloadInstruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
For more details, please contact local distributors! US$ 979
For more details, please contact local distributors! US$ 4406
For more details, please contact local distributors! US$ 8322
For more details, please contact local distributors! US$ 68530
For more details, please contact local distributors!
This assay has high sensitivity and excellent specificity for detection of Mini Samples Kynurenic Acid (KYNA).
No significant cross-reactivity or interference between Mini Samples Kynurenic Acid (KYNA) and analogues was observed.
Matrices listed below were spiked with certain level of Mini Samples Kynurenic Acid (KYNA) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Kynurenic Acid (KYNA) in samples.
|Matrix||Recovery range (%)||Average(%)|
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Kynurenic Acid (KYNA) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Kynurenic Acid (KYNA) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Kynurenic Acid (KYNA) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Reagents and materials provided
|Pre-coated, ready to use 96-well strip plate||1||Plate sealer for 96 wells||4|
|Detection Reagent A||1||Assay Diluent A||1×6mL|
|Detection Reagent B||1×60µL||Assay Diluent B||1×6mL|
|Reagent Diluent||1×300µL||Stop Solution||1×3mL|
|TMB Substrate||1×9mL||Instruction manual||1|
|Wash Buffer (30 × concentrate)||1×10mL|
Assay procedure summary
1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well.
And then add 25μL prepared Detection Reagent A immediately.
Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 50µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 50µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 25µL Stop Solution. Read at 450 nm immediately.
|Catalog No.||Related products for research use of Pan-species (General) Organism species||Applications (RESEARCH USE ONLY!)|
|CPD718Ge11||BSA Conjugated Kynurenic Acid (KYNA)||Immunogen; SDS-PAGE; WB.|
|CPD718Ge21||OVA Conjugated Kynurenic Acid (KYNA)||Immunogen; SDS-PAGE; WB.|
|PAD718Ge01||Polyclonal Antibody to Kynurenic Acid (KYNA)||WB; IHC; ICC; IP.|
|MED718Ge||Mini Samples ELISA Kit for Kynurenic Acid (KYNA)||Enzyme-linked immunosorbent assay for Antigen Detection.|
|CED718Ge||ELISA Kit for Kynurenic Acid (KYNA)||Enzyme-linked immunosorbent assay for Antigen Detection.|
|KSD718Ge11||ELISA Kit DIY Materials for Kynurenic Acid (KYNA)||Main materials for "Do It (ELISA Kit) Yourself".|