Multiplex Assay Kit for Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay)

RSE1; SAP130; SF3b130; STAF130; Spliceosome-associated protein 130; Pre-mRNA-splicing factor SF3b 130 kDa subunit

(Note: Up to 8-plex in one testing reaction)

Specificity

This assay has high sensitivity and excellent specificity for detection of Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay).
No significant cross-reactivity or interference between Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) and the recovery rates were calculated by comparing the measured value to the expected amount of Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-96 89
EDTA plasma(n=5) 79-97 92
heparin plasma(n=5) 80-101 79

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 82-104% 83-102% 85-103% 89-103%
EDTA plasma(n=5) 92-105% 87-95% 97-105% 80-89%
heparin plasma(n=5) 88-98% 83-93% 83-91% 80-92%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
96-well plate 1 Plate sealer for 96 wells 4
Pre-Mixed Standard 2 Standard Diluent 1×20mL
Pre-Mixed Magnetic beads (22#:SF3B3) 1 Analysis buffer 1×20mL
Pre-Mixed Detection Reagent A 1×120μL Assay Diluent A 1×12mL
Detection Reagent B (PE-SA) 1×120μL Assay Diluent B 1×12mL
Sheath Fluid 1×10mL Wash Buffer (30 × concentrate) 1×20mL
Instruction manual 1

Assay procedure summary

1. Preparation of standards, reagents and samples before the experiment;
2. Add 100μL standard or sample to each well,
    add 10μL magnetic beads, and incubate 90min at 37°C on shaker;
3. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60min at 37°C on shaker;
4. Wash plate on magnetic frame for three times;
5. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
6. Wash plate on magnetic frame for three times;
7. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPM216Mu01 Recombinant Splicing Factor 3B Subunit 3 (SF3B3) Positive Control; Immunogen; SDS-PAGE; WB.
RPM216Mu02 Recombinant Splicing Factor 3B Subunit 3 (SF3B3) Positive Control; Immunogen; SDS-PAGE; WB.
PAM216Mu01 Polyclonal Antibody to Splicing Factor 3B Subunit 3 (SF3B3) WB; IHC; ICC; IP.
PAM216Mu02 Polyclonal Antibody to Splicing Factor 3B Subunit 3 (SF3B3) WB; IHC; ICC; IP.
SEM216Mu ELISA Kit for Splicing Factor 3B Subunit 3 (SF3B3) Enzyme-linked immunosorbent assay for Antigen Detection.
LMM216Mu Multiplex Assay Kit for Splicing Factor 3B Subunit 3 (SF3B3) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.