ELISA Kit for Vitronectin (VTN)

V75; VN; VNT; Serum Spreading Factor; Somatomedin B; Complement S-Protein

Specificity

This assay has high sensitivity and excellent specificity for detection of Vitronectin (VTN).
No significant cross-reactivity or interference between Vitronectin (VTN) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Vitronectin (VTN) and the recovery rates were calculated by comparing the measured value to the expected amount of Vitronectin (VTN) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 91-102 97
EDTA plasma(n=5) 85-102 97
heparin plasma(n=5) 95-103 101

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Vitronectin (VTN) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Vitronectin (VTN) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Vitronectin (VTN) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 94-104% 94-102% 88-101% 81-94%
EDTA plasma(n=5) 96-103% 87-96% 96-103% 80-88%
heparin plasma(n=5) 90-98% 90-103% 79-91% 93-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Biomedical Engineering and Informatics Application of iTRAQ quantitative proteomics in identification of serum biomarkers in breast cancer IEEE: 6098563
PLoS ONE Identification of Altered Plasma Proteins by Proteomic Study in Valvular Heart Diseases and the Potential Clinical Significance PubMed: PMC3754973
Liver International Identification of candidate biomarkers for hepatocellular carcinoma in plasma of HCV-infected cirrhotic patients by 2-D DIGE Pubmed: 23944848
Analytical Biochemistry A multianalytical approach to investigate the effect of nanofiltration on plasma-derived factor IX clinical lots Pubmed:29154788
Journal of Materials Chemistry B Serum protein adsorption profile on BCP ceramic and influence of the elevated adsorption of adhesive proteins on the behaviour of MSCs Doi: 10.1039/C8TB02283F 
JOURNAL OF NEPHROLOGY Urinary vitronectin identifies patients with high levels of fibrosis in kidney grafts 33275196
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPB041Hu02 Recombinant Vitronectin (VTN) Positive Control; Immunogen; SDS-PAGE; WB.
RPB041Hu03 Recombinant Vitronectin (VTN) Positive Control; Immunogen; SDS-PAGE; WB.
RPB041Hu01 Recombinant Vitronectin (VTN) Positive Control; Immunogen; SDS-PAGE; WB.
PAB041Hu02 Polyclonal Antibody to Vitronectin (VTN) WB; IHC; ICC; IP.
PAB041Hu01 Polyclonal Antibody to Vitronectin (VTN) WB; IHC; ICC; IP.
PAB041Hu03 Polyclonal Antibody to Vitronectin (VTN) WB; IHC; ICC; IP.
LAB041Hu71 Biotin-Linked Polyclonal Antibody to Vitronectin (VTN) WB; IHC; ICC.
MAB041Hu22 Monoclonal Antibody to Vitronectin (VTN) WB; IHC; ICC; IP.
SEB041Hu ELISA Kit for Vitronectin (VTN) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB041Hu Multiplex Assay Kit for Vitronectin (VTN) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSB041Hu01 Antibody Pair for Vitronectin (VTN) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSB041Hu01 ELISA Kit DIY Materials for Vitronectin (VTN) Main materials for "Do It(ELISA Kit) Yourself"