≡

CLIA Kit for VEGF Co Regulated Chemokine 1 (VCC1)

CXCL17; SCYB17; DMC; Chemokine C-X-C-Motif Ligand 7; Dendritic cell and monocyte chemokine-like protein

Specificity

This assay has high sensitivity and excellent specificity for detection of VEGF Co Regulated Chemokine 1 (VCC1).
No significant cross-reactivity or interference between VEGF Co Regulated Chemokine 1 (VCC1) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant VEGF Co Regulated Chemokine 1 (VCC1) and the recovery rates were calculated by comparing the measured value to the expected amount of VEGF Co Regulated Chemokine 1 (VCC1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 99-105 102
EDTA plasma(n=5) 78-92 84
heparin plasma(n=5) 84-101 87

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level VEGF Co Regulated Chemokine 1 (VCC1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level VEGF Co Regulated Chemokine 1 (VCC1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of VEGF Co Regulated Chemokine 1 (VCC1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 96-104% 81-89% 83-102% 79-97%
EDTA plasma(n=5) 97-105% 96-105% 99-105% 92-102%
heparin plasma(n=5) 78-101% 78-99% 81-94% 97-104%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Rattus norvegicus (Rat) Organism species Applications (RESEARCH USE ONLY!)
RPC068Ra01 Recombinant VEGF Co Regulated Chemokine 1 (VCC1) Positive Control; Immunogen; SDS-PAGE; WB.
PAC068Ra01 Polyclonal Antibody to VEGF Co Regulated Chemokine 1 (VCC1) WB; IHC; ICC; IP.
MAC068Ra21 Monoclonal Antibody to VEGF Co Regulated Chemokine 1 (VCC1) WB; IHC; ICC; IP.
SEC068Ra ELISA Kit for VEGF Co Regulated Chemokine 1 (VCC1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCC068Ra CLIA Kit for VEGF Co Regulated Chemokine 1 (VCC1) Chemiluminescent immunoassay for Antigen Detection.
LMC068Ra Multiplex Assay Kit for VEGF Co Regulated Chemokine 1 (VCC1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.