Mini Samples ELISA Kit for Complement 1 Inhibitor (C1INH)

SERPING1; C1IN; C1-INH; C1NH; HAE1; HAE2; Serpin Peptidase Inhibitor Clade G Member 1; Angioedema Hereditary; C1 Inhibitor; C1 Esterase Inhibitor

Specificity

This assay has high sensitivity and excellent specificity for detection of Mini Samples Complement 1 Inhibitor (C1INH).
No significant cross-reactivity or interference between Mini Samples Complement 1 Inhibitor (C1INH) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Mini Samples Complement 1 Inhibitor (C1INH) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Complement 1 Inhibitor (C1INH) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 98-105 102
EDTA plasma(n=5) 95-104 99
heparin plasma(n=5) 80-97 93

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Complement 1 Inhibitor (C1INH) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Complement 1 Inhibitor (C1INH) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Complement 1 Inhibitor (C1INH) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-99% 90-97% 87-101% 78-95%
EDTA plasma(n=5) 94-101% 84-103% 85-93% 85-99%
heparin plasma(n=5) 96-105% 84-97% 94-104% 83-91%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×60µL Assay Diluent A 1×6mL
Detection Reagent B 1×60µL Assay Diluent B 1×6mL
TMB Substrate 1×4.5mL Stop Solution 1×3mL
Wash Buffer (30 × concentrate) 1×10mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well. Incubate 1 hour at 37°C;
3. Aspirate and add 25µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 25µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 25µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 20µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Brain Res Bull Association of increase in Serping1 level with dopaminergic cell reduction in an MPTP-induced Parkinson's disease mouse model Pubmed: 32485229
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPA235Mu01 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu02 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu03 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu04 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu05 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu06 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu07 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
RPA235Mu08 Recombinant Complement 1 Inhibitor (C1INH) Positive Control; Immunogen; SDS-PAGE; WB.
PAA235Mu01 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
PAA235Mu04 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
PAA235Mu05 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
PAA235Mu03 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
PAA235Mu02 Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IP.
LAA235Mu71 Biotin-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC.
LAA235Mu81 FITC-Linked Polyclonal Antibody to Complement 1 Inhibitor (C1INH) WB; IHC; ICC; IF.
SEA235Mu ELISA Kit for Complement 1 Inhibitor (C1INH) Enzyme-linked immunosorbent assay for Antigen Detection.
MEA235Mu Mini Samples ELISA Kit for Complement 1 Inhibitor (C1INH) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA235Mu Multiplex Assay Kit for Complement 1 Inhibitor (C1INH) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.