ELISA Kit for Secretin (SCT)

Specificity

This assay has high sensitivity and excellent specificity for detection of Secretin (SCT).
No significant cross-reactivity or interference between Secretin (SCT) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Secretin (SCT) and the recovery rates were calculated by comparing the measured value to the expected amount of Secretin (SCT) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 96-103 101
EDTA plasma(n=5) 96-105 101
heparin plasma(n=5) 78-96 89

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Secretin (SCT) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Secretin (SCT) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Secretin (SCT) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 93-102% 89-97% 79-94% 79-102%
EDTA plasma(n=5) 79-92% 93-101% 81-89% 83-104%
heparin plasma(n=5) 96-105% 81-93% 83-99% 93-101%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
SpringerPlus Weak cation exchange magnetic beads coupled with matrix-assisted laser desorption ionization-time of flight-mass spectrometry in screening serum protein markers in osteopenia Pubmed:27347465
Cell Secretin-Activated Brown Fat Mediates Prandial Thermogenesis to Induce Satiation Pubmed: 30449620
Nature Feeding induces cholesterol biosynthesis via the mTORC1–USP20–HMGCR axis Pubmed: 33177714
Novel non-adrenergic, endocrine mediators of brown adipose tissue thermogenesis
Nat Metab Secretin activates brown fat and induces satiation 34158656
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPB075Mu02 Recombinant Secretin (SCT) Positive Control; Immunogen; SDS-PAGE; WB.
RPB075Mu01 Recombinant Secretin (SCT) Positive Control; Immunogen; SDS-PAGE; WB.
PAB075Mu02 Polyclonal Antibody to Secretin (SCT) WB; IHC; ICC; IP.
PAB075Mu01 Polyclonal Antibody to Secretin (SCT) WB; IHC; ICC; IP.
CEB075Mu ELISA Kit for Secretin (SCT) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB075Mu Multiplex Assay Kit for Secretin (SCT) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB075Mu11 ELISA Kit DIY Materials for Secretin (SCT) Main materials for "Do It (ELISA Kit) Yourself".