CLIA Kit for Vitamin D2 (VD2)

Ergocalciferol; Deltalin; Drisdol; Calcidol

Specificity

This assay has high sensitivity and excellent specificity for detection of Vitamin D2 (VD2).
No significant cross-reactivity or interference between Vitamin D2 (VD2) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of Vitamin D2 (VD2) and the recovery rates were calculated by comparing the measured value to the expected amount of Vitamin D2 (VD2) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-97 94
EDTA plasma(n=5) 97-105 101
heparin plasma(n=5) 89-101 95

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Vitamin D2 (VD2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Vitamin D2 (VD2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Vitamin D2 (VD2) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 94-102% 81-104% 90-99% 82-95%
EDTA plasma(n=5) 94-104% 99-105% 85-92% 96-104%
heparin plasma(n=5) 94-103% 97-104% 78-92% 79-95%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
7. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
International Journal of Biological Macromolecules Carbon dots-modified chitosan based electrochemical biosensing platform for detection of vitamin D Pubmed:29275197
nanotechnology Studies on Carbon quantum dots embedded Iron Oxide Nanoparticles and their Electrochemical response Pubmed: 32396882
Catalog No. Related products for research use of Pan-species (General) Organism species Applications (RESEARCH USE ONLY!)
CPA921Ge11 BSA Conjugated Vitamin D2 (VD2) Immunogen; SDS-PAGE; WB.
CPA921Ge21 OVA Conjugated Vitamin D2 (VD2) Immunogen; SDS-PAGE; WB.
PAA921Ge01 Polyclonal Antibody to Vitamin D2 (VD2) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
LAA921Ge71 Biotin-Linked Polyclonal Antibody to Vitamin D2 (VD2) WB; IHC; ICC.
CEA921Ge ELISA Kit for Vitamin D2 (VD2) Enzyme-linked immunosorbent assay for Antigen Detection.
CCA921Ge CLIA Kit for Vitamin D2 (VD2) Chemiluminescent immunoassay for Antigen Detection.
LMA921Ge Multiplex Assay Kit for Vitamin D2 (VD2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA921Ge11 ELISA Kit DIY Materials for Vitamin D2 (VD2) Main materials for "Do It (ELISA Kit) Yourself".